Construction machinery has a variety of operating requirements, a complex environment, and multiple people working at the same time. It is difficult to avoid collisions with on-site workers and cause casualties only by relying on the vehicle's own rearview mirror and the driver's naked eyes to observe the road conditions.In addition, construction machinery driving is risky and difficult, and it is becoming more and more difficult to recruit drivers. Therefore, how to ensure the personal safety to the greatest extent while enabling them to complete tasks more accurately and efficiently is a answer that the entire industry is seeking.
Functions
|
P/N |
Instructions |
|
HMW |
The furthest can identify the vehicle 80M ahead, and the distance/relative speed of the vehicle in front is ≤2.7 for early warning |
|
LDW |
Exceeding the lane line distance ≤ -10CM for early warning |
|
PCW |
Pedestrian distance/current vehicle speed ≤ 2s for early warning |
|
FCW |
Front vehicle distance/relative speed≤1.5 for early warning |
|
Headway zebra crossing warning |
It can identify the zebra crossing within 10 meters ahead and give a reminder that there is a zebra crossing ahead |
|
Note |
The function startup speed defaults to 30KM/H, which can be set, the function sensitivity and the alarm time interval can be set |
|
P/N |
Instructions |
|
Driver fatigue monitoring |
If the driver is detected to be yawning, eyes closed, etc. twice in a row, a voice alarm will be issued, and the time interval between each alarm is 20 seconds. |
|
Mobile monitoring |
If the driver is detected to answer and make calls twice in a row, a voice alarm will be issued, and the time interval between each alarm is 300 seconds. |
|
Smoking monitoring |
If the driver's smoking behavior is detected twice in a row, a voice alarm is issued, and the time interval between each alarm is 300 seconds. |
|
Distracted driving monitoring |
If the driver's distracted driving is detected twice in a row, a voice alarm will be issued, and the time interval between each alarm is 20 seconds. |
|
Play mobile phone |
The driver is detected to be playing with the mobile phone twice in a row, and a voice alarm is issued, and the time interval between each alarm is 20 seconds. |
|
Seat belt monitoring |
If it detects that the driver is not wearing a seat belt twice in a row, a voice alarm will be issued, and the time interval between each alarm is 20 seconds. |
|
Infrared blocking |
Infrared blocking is detected twice in a row, and a voice alarm is issued, and the time interval between each alarm is 20 seconds. |
|
Device occlusion |
If the device is blocked twice in a row, a voice alarm will be issued, and the time interval between each alarm is 20 seconds。 |
|
Identification |
Detect whether the driver's identity is a registered driver, and if it is not a registered driver, send an alarm to the platform. |
|
Note |
The function start speed defaults to 30KM/H, which can be set, the function sensitivity can be set, and the alarm time interval can be set |
|
P/N |
Instructions |
|
Drive straight |
When the vehicle is driving in a straight line, the system will detect and issue audible warnings to pedestrians and non-motor vehicle drivers who are close to the dangerous area of the blind spot or almost completely close to the front of the vehicle. |
|
Vehicle turning (left and right blind spots) |
When the vehicle makes a turn, the system will monitor pedestrians and non-motor vehicles that are close to the side of the vehicle or completely close to the side of the vehicle, and sound warnings will be issued at the same time. |
|
Note |
The function start speed defaults to 30KM/H, which can be set, the function sensitivity can be set, and the alarm time interval can be set |
Vehicle monitoring Function
|
P/N |
Instructions |
|
Vehicle monitoring |
After the vehicle is powered on, the front-facing camera, left and right blind spot cameras, and rear-facing cameras simultaneously start to record the surrounding environment of the vehicle and store it in the machine. The platform can remotely pull the video through the website. |
|
Stopping collision |
When a collision occurs, the device will transmit 5 seconds of video before and after the collision to the platform. (Collision video upload time needs to be changed and explained in advance) |
|
Note |
When using vehicle monitoring during parking, the vehicle volume must be powered on, otherwise the device will not work when powered off |
Other functions
|
P/N |
Instructions |
|
One-click alarm |
The device has an emergency button and supports one-key alarm function. |
|
Vehicle location |
Support Beidou positioning system and GPS global general civil navigation |
|
Voice function |
It supports 4 channels of audio and video input, 1 channel of voice intercom, TTS voice broadcast, and can be connected to an external 8 ohm 2W speaker. |
|
Network support |
Support 3/4G network/WIFI network/local network/FTP client. |
|
Fatigue warning |
Set the fatigue warning time in the platform parameter configuration, and trigger the linkage warning when the driving time reaches the time. |
|
Driving overtime |
Set the driving timeout time in the platform parameter configuration. When the trigger time is reached, a linkage alarm is triggered. |